X Series E83 X3 2.5Si (N52K) OFFRD
Mount oil pressure switch on new filter housing.
Installation:
Tightening torque 12 61 2AZ
.
Mount sealing rings on oil supply and return lines.
Mount oil lines on filter housing (M8x28 screw).
Installation:
Lubricate sealing rings lightly with oil.
Tightening torque, 17 22 5AZ
.
Secure oil lines with pre-installed rubber grommet.
Remove underbody protection bracket.
Mount holding frame for engine oil cooler on crashbox.
There must be 2 press-in nuts for the radiator bracket on the
crashbox, otherwise replace crashbox.
Mount engine oil cooler on oil cooler bracket (M8x35 screw).
Installation:
Tightening torque, 17 21 2AZ
.
RA Retrofitting supplementary oil cooler (high-speed scope option SA840) (N52K)
BMW AG - TIS
11.02.2013 10:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
