X Series E83 X3 2.5Si (N52K) OFFRD
Lever retaining ring (1) out of groove with a small screwdriver.
Slide locking ring (1) towards rear.
Drive out cylinder pin (2).
Screw in special tool 23 0 210 until it is firmly connected with
radial seal (1).
Pull out radial seal with special tool 23 0 210 .
Coat sealing lips of radial seal and selector shaft with transmission
oil.
Drive in radial seal with special tool 23 0 220 .
RA Replacing radial seal for selector shaft (GS6-37BZ)
BMW AG - TIS
11.02.2013 10:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
