X Series E83 X3 2.5Si (N52K) OFFRD
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove underbody protection with bracket at front and rear.
•
Remove reinforcement plate
•
Remove complete exhaust system
•
Remove heat shields
•
Remove front propeller shaft at transfer box and tie to one
side
•
Support engine with lifter when removing transmission
Release bolts (1).
Remove bracket and heat shield.
Unclip lines (2).
Remove bracket (3).
Disconnect plug connector (1).
Release screws (2).
Remove retaining plate (3).
Tightening torque 24 00 2AZ
.
Release aluminium screws on right next to cable retaining plate
with special tool 00 9 010 .
Blue aluminium screws/bolts must be replaced.
Tightening torque 24 00 2AZ
.
RA Removing and installing automatic transmission (GA6L45R)
BMW AG - TIS
11.02.2013 11:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
