X Series E83 X3 2.5Si (N52K) OFFRD
Grip clamping sleeve (1).
Loosen nut (2).
Release screws (3).
Remove cable (4).
Tightening torque 25 16 1AZ
.
Installation:
Adjust selector lever
Release screw (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
Release nut (1) and bracket from transmission oil lines on oil
sump.
Detach plugs (1) and (2) from servomotor.
RA Removing and installing automatic transmission (GA6L45R)
BMW AG - TIS
11.02.2013 11:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
