X Series E83 X3 2.5Si (N52K) OFFRD
Supporting transmission:
Support transmission with special tools 23 4 050 , 23 0 132
and 00 2 030 .
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
After completion of work, check transmission oil level.
-
Remove propeller shaft from transmission.
-
Release centre bearing.
-
Tie propeller shaft to one side.
Tasks are described in Removing propeller shaft.
Important!
Do not allow propeller shaft to hang from fixed ball joint (risk
of damage).
Unfasten screws and remove transmission cross-member.
Tightening torque 24 71 1AZ
.
Crank engine at vibration damper in direction of rotation until
screw (1) is visible in opening.
Release all screws of torque converter with special tool
24 1 110 .
Crank engine further and release remaining 5 bolts.
Tightening torque 24 40 1AZ
.
RA Removing and installing automatic transmission (GA6L45R)
BMW AG - TIS
11.02.2013 11:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -