X Series E83 X3 2.5Si (N52K) OFFRD
27 10 050
Replacing output flange for front axle output
(ATC 400/500 X-Drive)
Important!
Do not move vehicle with engine power once propeller shaft
has been removed.
Replace output flange only in conjunction with a new radial
shaft seal.
After completion of work, check transmission oil level.
Use only approved transmission oil.
Failure to comply with this requirement will result in serious
damage to the transfer box!
Operation is identical to Replacing radial shaft seal for front axle
output.
RA Replacing output flange for front axle output (ATC 400/500 X-Drive)
BMW AG - TIS
11.02.2013 11:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
