X Series E83 X3 2.5Si (N52K) OFFRD
Remove drive flange with special tool 33 1 150 .
Installation:
Replace O-ring in output flange.
Check that O-ring is in correct position.
Important!
The propeller shaft may move when the output flange is
pushed on. The retaining ring can thus no longer be fitted.
Installation:
Version: output shaft with mounting groove (1):
-
Push on output flange
-
Using 2 screwdrivers, press output flange downwards or
output shaft (2) upwards until groove for retaining ring is
completely visible.
-
Fit retaining ring.
RA Replacing radial shaft seal for output flange (ATC 400/500 X-Drive)
BMW AG - TIS
11.02.2013 11:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
