X Series E83 X3 2.5Si (N52K) OFFRD
31 10 010
Removing and installing/replacing
reinforcement plate
Important!
Observe safety instructions for raising the vehicle
Driving without reinforcement plate is not permitted!
If necessary, release expander rivet (1).
If necessary, release screws (2) and remove cover (3).
If necessary, release screws (1).
If necessary, release expander rivet (2).
If necessary, remove rear assembly underside protection or
shield on reinforcement plate.
Release screws (3).
Remove reinforcement plate.
Installation:
Replace screws.
Tightening torque 31 10 9AZ
.
Replacement:
•
If necessary, modify absorber, cover, cover with absorber and
air routing duct
RA Removing and installing/replacing reinforcement plate
BMW AG - TIS
11.02.2013 11:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
