X Series E83 X3 2.5Si (N52K) OFFRD
31 12 026
Removing and installing/replacing guide joint
in swivel bearing
Special tools required:
•
31 2 240
•
33 4 200
•
33 4 205
Necessary preliminary tasks:
•
Remove front wheel
Slacken nut (1), grip if necessary.
Release screws (2).
Remove tension strut with guide joint from swivel bearing.
Installation:
Recondition thread in swivel bearing.
Keep recess for guide joint, bore in tension strut and guide joint
journal clean and free from grease.
Replace screws.
Tightening torque 31 12 21AZ
(guide joint to swivel bearing).
Replace self-locking nut.
Tightening torque 31 12 20AZ
(tension strut to guide joint).
RA Removing and installing/replacing guide joint in swivel bearing
BMW AG - TIS
11.02.2013 11:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
