Removing and Installing Steering Column for X Series E83 X3 25Si (N52K) OFFRD
32 31 090
Removing and installing/replacing steering
column
Necessary preliminary tasks:
•
Slide upper section of steering spindle into steering column
(see Replacing steering spindle sleeve)
•
Remove fixture for steering column stalks
Disconnect plug connections (1, 2).
If necessary, remove interlock cable from steering column.
Expose wiring harness and remove from cable duct (3).
Turn holder (5) approx. 45
°
downwards and remove.
Remove plug connection (4) from holder (5) and disconnect.
Release screws (1, 2).
Tightening torque 32 31 6AZ
.
Unscrew nuts.
Remove steering column towards rear through instrument panel.
Installation:
Replace self-locking nuts.
Tightening torque 32 31 15AZ
.
RA Removing and installing/replacing steering column
BMW AG - TIS
11.02.2013 12:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
