X Series E83 X3 2.5Si (N52K) OFFRD
Release hose clamp (1) and detach suction line (2) from vane
pump.
Installation:
Markings (3) on suction line and vane pump must match up.
If a marking is missing, it is important to ensure when installing the
hydraulic line that it is laid without tension and with sufficient
spacing to adjoining components.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing suction line for power steering (N52)
BMW AG - TIS
11.02.2013 13:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
