X Series E83 X3 2.5Si (N52K) OFFRD
32 41 060
Removing and installing/replacing power
steering vane pump (N52)
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove intake filter housing
•
Remove belt pulley
RA Removing and installing/replacing power steering vane pump (N52)
BMW AG - TIS
11.02.2013 13:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -