X Series E83 X3 2.5Si (N52K) OFFRD
Insert dust sleeve in front annular groove and press into annular
groove over entire diameter.
Installation:
The area between the dust sleeve and the brake calliper housing
must be kept dry. This area must not come into contact with Ate
brake cylinder paste or brake fluid so as to ensure that the dust
sleeve is perfectly seated.
Take up brake piston with a commercially available extension and
socket and gently press onto dust sleeve.
Blow up sleeve with compressed air (max. 3 bar). Sleeve jumps
over brake piston.
Installation:
Coat dust sleeve and brake piston with brake fluid to facilitate
installation of dust sleeve.
RA Overhauling left or right rear brake caliper (brake caliper removed)
BMW AG - TIS
11.02.2013 14:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
