X Series E83 X3 2.5Si (N52K) OFFRD
35 31 000
Removing and installing or replacing clutch
pedal
Necessary preliminary tasks:
•
Remove pedal trim.
Disconnect return spring (1).
Press pin ends (2) together and remove pin.
Detach locking clip (3) and pull clutch pedal off bearing block.
Installation:
Replace locking clip.
The locking clip must be seated with both legs in the pin groove.
Installation:
Check bearing bushings (1) and replace if necessary.
Lightly grease bearing bushings (1).
Replace rubber grommet (2) if necessary.
RA Removing and installing or replacing clutch pedal
BMW AG - TIS
11.02.2013 14:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -