X Series E83 X3 2.5Si (N52K) OFFRD
Mark severance cut in accordance with measurement a and cut
rear axle carrier lower section (1) on both sides of vehicle.
Measurement a=140 mm from center point of bore with dia.
20 mm.
Installation:
Adjust new parts to fit with straightening attachment or universal
mount.
Before welding in, also adjust tail panel, rear lid and rear lights to
fit.
Weld reinforcement (1) in area (2) from inside additionally.
Weld in reinforcement plate in area (3).
RA Replacing complete rear luggage compartment floor (tail panel removed)
BMW AG - TIS
11.02.2013 15:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
