X Series E83 X3 2.5Si (N52K) OFFRD
51 11 145
Removing and installing/replacing centre
insert for bumper trim
Necessary preliminary tasks:
•
Remove front bumper trim
•
Remove centre radiator grille
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Version with headlight washer system:
Release lock (1).
Feed hose (2) in direction of arrow out of holder (3).
Release catches (1) and remove centre insert (2) in direction of
arrow.
Installation:
Catches (1) on bumper trim (2) must not be damaged.
RA Removing and installing/replacing centre insert for bumper trim
BMW AG - TIS
11.02.2013 16:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
