X Series E83 X3 2.5Si (N52K) OFFRD
Note:
Position of butylene tape (1) on inner door plate.
Important!
Do not damage Bowden cable (2) and lock knob control
rod (3).
Note:
Position of butylene tape (1) on sound insulation (2).
Note:
A marking (2) is provided all round on the sound insulation (1).
Butylene tape (3) rests on or inside the marking (2).
Clean bonding area with adhesive remover (sourcing reference:
BMW Parts Service).
Air drying time: 1 minute
Important!
Adhesive areas must be dry and free of dust and grease.
Once it has been cleaned, do not touch the adhesive area
with bare hands.
RA Removing and installing/replacing sound insulation in left or right front door
BMW AG - TIS
11.02.2013 18:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
