X Series E83 X3 2.5Si (N52K) OFFRD
51 49 008
Removing and installing/replacing panel for
rear lid
Necessary preliminary tasks:
•
Remove luggage compartment light (on rear lid)
Release expansion rivets (1).
Installation:
If necessary, replace faulty expander rivets (1).
Release screws (1).
Unclip clips (2) and remove trim (3) towards bottom.
Installation:
All clips (1) are white.
If necessary, replace faulty clips (1).
Remove insulating mat (2) from old trim (3) and insert in new
trim.
RA Removing and installing/replacing panel for rear lid
BMW AG - TIS
11.02.2013 18:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
