X Series E83 X3 2.5Si (N52K) OFFRD
Replacing pyrotechnical device:
Connect plug (1) to new pyroactivator (2) and lock.
Clip pyroactivator (2) into new mounting (3).
Installing pyrotechnical device:
Press together retainer for pyrotechnical device at lugs.
Insert retainer for pyrotechnical device into release plate and tilt in
in upward direction.
Retainer for pyrotechnical device must audibly snap into place.
Note:
Check seating of retaining lugs in retainer.
Laying wiring harness:
Secure wiring harness in carrier section with strain relief.
Mounting cover:
Clip cover onto carrier section.
Cover must audibly snap into place.
RA Replacing gas cartridge (pyroactivator) for crash-active head restraint on front
BMW AG - TIS
11.02.2013 18:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
