X Series E83 X3 2.5Si (N52K) OFFRD
52 26 015
Removing and installing/replacing left or right
rear seat backrest (through-loading system)
Carry out following tasks beforehand:
•
Remove armrest side section on rear seat backrest
•
Remove center seat belt (lower fastening)
Fold down backrests.
Release screws (1) of outer mount.
Release screws (2) of center mount.
Remove center mount (3).
Installation:
Correctly place center mount on bearing pedestal.
If necessary, replace faulty outer mount.
Lever both backrests out of center mount (1) and pull out left
backrest (2) towards left. In the process, mounting shaft of right
backrest is pulled out of left backrest.
Remove left backrest (2) from vehicle.
Note:
•
Removal of both backrests:
Release screws on outer mount of right backrest and remove
backrest.
•
Removal of right backrest:
Proceed in mirror-inverted fashion to left backrest.
Installation:
Bearing bushings (1) must not be damaged.
Replace faulty bearing bushings.
RA Removing and installing/replacing left or right rear seat backrest (through-load
BMW AG - TIS
11.02.2013 19:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
