X Series E83 X3 2.5Si (N52K) OFFRD
52 26 033
Removing and installing/replacing upper
cover section on armrest for rear seat
Drive out two-part hinge pin (1) with a suitable tool (bar, etc.),
pressing material in area (2) on both sides (risk of damage).
Installation:
Drive in one hinge pin each from right and left. Hinge pins must be
flush with outer edge of hinge.
RA Removing and installing/replacing upper cover section on armrest for rear seat
BMW AG - TIS
11.02.2013 19:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
