X Series E83 X3 2.5Si (N52K) OFFRD
Make sure washer (4) is correctly positioned with turning lock.
Replace microencapsulated screws (5) and insert with Loctite.
Tightening torque: 54 12 05AZ
.
Performing function check:
•
Floating roofliner must be able to move in control rail in X-direction.
•
Floating roofliner is positioned on right and can be pressed towards left under spring tension.
•
Floating roofliner springs back towards right into initial position.
RA Removing and installing/replacing both floating roofliners for glass slide/tilt
BMW AG - TIS
11.02.2013 20:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
