bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Rear Window Wiper Motor > < 2 RA Removing And Installing_replacing Rear Window Wiper Blade
Page 1
background image

61 62 030

Replacing wiper arm for rear window wiper

Pull internal locks (2) in direction of arrow and remove cover
cap (1) as illustrated.

Installation:

Locks (1) and (2) of cover cap (3) must not be damaged.

Set wiper arm (1) upwards.

Release nut (2) and remove wiper arm (1) in direction of arrow.

Installation:

Tightening torque  61 62 5AZ

.

Installation:

Rear window wiper motor must be in wiper rest position.

Adjust measurement (A) between wiper blade (1) and rear
window edge (2).

Measurement (A): 29 mm.

RA  Replacing wiper arm for rear window wiper

BMW AG - TIS

11.02.2013  21:20

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Rear Window Wiper Motor > < 2 RA Removing And Installing_replacing Rear Window Wiper Blade