X Series E83 X3 2.5Si (N52K) OFFRD
Fold back side trim panel (1) in direction of arrow.
Turn socket housing for rear light (2) in direction of arrow and
remove from rear light (3).
Remove direction indicator bulb.
Installation:
Make sure socket housing for rear light (2) is correctly engaged on
rear light (3).
Rear lid:
Necessary preliminary tasks:
•
Remove panel for rear lid
Note:
Socket housing for rear light (1) is not included in scope of
spare parts.
Turn socket housing for rear light (1) or (2) in direction of
arrow and remove from rear light (3).
Remove tail light bulb or rear fog light bulb.
Installation:
Make sure socket housings for rear lights (1) and (2) are
correctly seated and engaged on rear light (3).
RA Replacing a socket housing for left or right rear light (from 09/2006)
BMW AG - TIS
11.02.2013 21:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
