bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Removing And Installing_replacing Left Or Right Rear Light (on Rear Lid) (from 0 > < 7 RA Removing And Installing_replacing Left Or Right Rear Light (on Side Panel) (from
Page 1
background image

63 21 180

Removing and installing/replacing left or right
rear light (on side panel) (up to 09/2006)

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Necessary preliminary tasks:

Remove socket housing for rear light

Unscrew nuts (1,2,3). Tightening torque  63 21 1AZ

.

Remove rear light (4) in outwards direction from side panel (5).

 

Installation:

Observe tightening sequence:

1. 

Tighten nut (1)

2. 

Tighten nut (2)

3. 

Tighten nut (3)

Make sure sealing frame for rear light is correctly seated
on rear light (4)

Make sure gap (outer) is uniform all round between rear
light (4) and side panel (5).

RA  Removing and installing/replacing left or right rear light (on side panel) (up t

BMW AG - TIS

11.02.2013  22:03

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Removing And Installing_replacing Left Or Right Rear Light (on Rear Lid) (from 0 > < 7 RA Removing And Installing_replacing Left Or Right Rear Light (on Side Panel) (from