X Series E83 X3 2.5Si (N52K) OFFRD
64 11 208
Replacing heater core
Warning!
Scalding hazard!
Work on the cooling system may only be carried out when it
has cooled down.
Necessary preliminary tasks:
•
Remove microfilter housing
•
Remove instrument panel trim
Recycling
Coolant emerges when coolant hoses are detached.
Have a suitable collecting container ready.
Catch and dispose of escaping coolant.
Observe country-specific waste-disposal regulations.
Detach hot water hoses (1) from heater and blow coolant out of
heater core.
Note:
For purposes of clarity, the following operations are shown on the
removed heater core.
Pull out temperature sensor (1) and unclip wiring harness (2)
from holder.
Installation:
Ensure correct lead routing.
RA Replacing heater core
BMW AG - TIS
11.02.2013 22:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
