X Series E83 X3 2.5Si (N52K) OFFRD
65 75 551
Removing and installing/replacing tilt sensor
Necessary preliminary tasks:
•
Remove luggage compartment floor trim panel.
Remove clips (1) and fold up front luggage compartment floor
trim panel (2) slightly.
Installation:
Make sure front luggage compartment floor trim panel (2) is
correctly seated.
Note:
Front luggage compartment floor trim panel shown removed for
purposes of clarity.
Unfasten plug connection (1) and disconnect.
Unscrew nuts (2).
Remove tilt sensor (3) in direction of arrow.
RA Removing and installing/replacing tilt sensor
BMW AG - TIS
12.02.2013 01:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
