X Series E83 X3 2.5Si (N52K) OFFRD
1
Retaining screw, A- and D-pillars
2
Gas generator
3
Retaining screws, gas generator
4
Retaining clips, head airbag
5
AHPS head airbag
6
Retaining screws, retaining clips
Important!
When removing AHPS head airbag, do not damage
-
AHPS head airbag
-
Windscreen
-
Retaining clips
-
Trim panels
Release retaining screw (1) on A-pillar.
Tightening torque 72 12 4AZ
.
Note:
Screw is held in end fitting by locking washer.
RA Removing and installing/replacing left or right AHPS2 head airbag (version witho
BMW AG - TIS
12.02.2013 01:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
