X Series E83 X3 3.0d (M57TU) OFFRD
11 22 000
Removing and installing/replacing
flywheel/automatic (M57TU)
Special tools required:
•
11 9 260
•
11 9 265
Necessary preliminary tasks:
•
Disconnect battery negative terminal.
•
Remove and install underbody protection.
•
Remove and install reinforcing plate.
•
Remove and install complete exhaust system.
•
Remove and install transmission.
•
If necessary, remove clutch.
Note:
Automatic only:
Block flywheel with special tools 11 9 260 / 11 9 265 and with
a transmission bolt (1).
Unfasten flywheel screws.
Installation:
Flywheel is secured with a dowel pin.
Fit new flywheel screws.
Clean crankshaft thread for flywheel screws.
Tightening torque 11 22 1AZ
.
Pictures show M54.
RA Removing and installing/replacing flywheel/automatic (M57TU)
BMW AG - TIS
14.02.2013 21:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -