X Series E83 X3 3.0d (M57TU) OFFRD
12 42 550
Removing and installing/replacing battery
positive lead between starter motor and jump
start connection point (M57TU, M57T2)
Necessary preliminary tasks:
•
Read out fault memory of DDE control unit; if necessary, work
through test schedules
•
Switch off ignition
•
Disconnect battery negative lead
Unclip cover (1).
Open protective cap.
Slacken nut (1).
Tightening torque 12 51 4AZ
.
RA Removing and installing/replacing battery positive lead between starter motor an
BMW AG - TIS
14.02.2013 22:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
