X Series E83 X3 3.0d (M57TU) OFFRD
Supporting engine and transmission:
-
Install special tool 11 0 250 between dome cross-brace and
engine suspension eye and secure with dowel pin.
-
Pretension special tool with adjusting screw (1) to
measurement "A".
Engine secured in installation position.
Installation position, measurement "A" = approx. 39.5 cm.
-
Remove propeller shaft from transmission.
-
Release centre bearing.
-
Tie propeller shaft to one side.
Tasks are described in Removing propeller shaft.
Unfasten screws and remove transmission cross-member.
Tightening torque 22 32 4AZ/5AZ
.
Detach plug (1) from reversing light switch.
Release cable from mountings and tie to one side.
RA Removing and installing transmission (GS6-53DZ)
BMW AG - TIS
14.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
