X Series E83 X3 3.0d (M57TU) OFFRD
Detach plugs (1) and (2) from servomotor.
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Relieve tension on clutch slave cylinder slowly; otherwise air
will be drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque 21 52 5AZ
.
Lowering transmission:
-
Turn special tool 11 0 250 back with adjusting screw (1) to
measurement "A".
Transmission in removal position.
Transmission removal position, measurement "A" = approx.
37.5 cm.
Important!
Risk of damage:
When lowering the transmission, make sure the engine does
not rest against the bulkhead.
Unlock bearing pin (1) in direction of arrow and remove.
Lift out shift arm.
Installation:
Grease bearing pins (1).
Grease, refer to BMW Service Operating Fluids.
Note:
Illustrations show E60.
RA Removing and installing transmission (GS6-53DZ)
BMW AG - TIS
14.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -