X Series E83 X3 3.0d (M57TU) OFFRD
Release screw (1).
Pull off plug (2).
Unlock retainer (3) and remove line (4) in direction of arrow and
lay to one side.
Installation:
Replace sealing ring.
Supporting engine and transmission:
-
Install special tool 11 0 250 between dome cross-brace and
engine suspension eye and secure with dowel pin.
-
Pretension special tool with adjusting screw (1) to
measurement "A".
Engine secured in installation position.
Installation position, measurement "A" = 39.5 cm.
-
Engine secured in installation position.
-
Remove propeller shaft from transmission.
-
Release center bearing.
-
Tie propeller shaft to one side.
Tasks are described in Removing propeller shaft.
Grip clamping sleeve (1) and slacken nut (2).
Tightening torque 25 16 2AZ
.
Installation:
Adjust selector lever
RA Removing and installing automatic transmission (A5S 360R / 390R)
BMW AG - TIS
14.02.2013 23:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -