X Series E83 X3 3.0d (M57TU) OFFRD
27 21 030
Replacing radial shaft seal for front axle
output (ATC 400/500 X-Drive)
Special tools required:
•
23 0 490
•
27 1 410
•
27 1 420
Important!
After completion of work, check transmission oil level.
Use only the approved gear oil in this transfer box.
Necessary preliminary tasks:
•
Remove reinforcement plate (E53 only).
•
Remove front propeller shaft.
Press out output flange (1) with a suitable tool (2) in direction of
arrow.
RA Replacing radial shaft seal for front axle output (ATC 400/500 X-Drive)
BMW AG - TIS
15.02.2013 00:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
