X Series E83 X3 3.0d (M57TU) OFFRD
32 21 151
Replacing left or right tie rod
Special tools required:
•
31 2 300
Note:
If the tie rod end to tie rod screw/bolt connection is released, it is
necessary after reinstallation to carry out a wheel/chassis
alignment check.
Necessary preliminary tasks:
•
Remove front wheel
Important!
Do not release tie rod end from swivel bearing with impact
tool.
Rubber gaiter of tie rod end must not be damaged!
Do not pull stainless steel ring off journal.
RA Replacing left or right tie rod
BMW AG - TIS
15.02.2013 01:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -