X Series E83 X3 3.0d (M57TU) OFFRD
34 52 516
Removing and installing/replacing DSC
control unit
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove hydraulic unit
Release screws (1) and carefully detach control unit (2) towards
front.
Important!
Risk of damage to the contacts when removing and installing
the hydraulic unit.
Installation:
Keep sealing faces clean.
Replace screws.
Observe tightening sequence (1-4).
Tightening torque 34 51 1AZ
RA Removing and installing/replacing DSC control unit
BMW AG - TIS
15.02.2013 03:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -