X Series E83 X3 3.0d (M57TU) OFFRD
51 12 156
Removing and installing/replacing rear
bumper trim (M Technic aerodynamic kit)
Necessary preliminary tasks:
•
Remove trim on loading sill
Release screws (1) on bumper trim (2).
Release screws (1) and nut (2) on left and right.
Installation:
Make sure wheel arch trim (3) is in correct position.
Press wheel arch trim slightly to one side and release screw (1)
on bumper trim (2) on left and right.
RA Removing and installing/replacing rear bumper trim (M Technic aerodynamic kit)
BMW AG - TIS
15.02.2013 05:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -