X Series E83 X3 3.0d (M57TU) OFFRD
51 13 402
Removing and installing/replacing handle
strip (on rear lid)
Necessary preliminary tasks:
•
Remove rear finisher trim
Release catches (1 and 2) on handle strip (3).
Feed handle strip (1) in direction of arrow out of rear finisher (2).
Installation:
Seal (1) on handle strip (2) must not be damaged.
Replacement:
If necessary, replace seal (1).
RA Removing and installing/replacing handle strip (on rear lid)
BMW AG - TIS
15.02.2013 05:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -