X Series E83 X3 3.0d (M57TU) OFFRD
51 16 480
Removing and installing or replacing front
grab handle
Carefully lever out trims (1).
Release screws underneath and remove grab handle (2).
Note:
When replacing or when lowering or removing the roofliner, it is
necessary to remove the intermediate plate (1) beforehand.
If necessary, pull off door seal (2) and feed out intermediate
plate (1).
Installation:
Intermediate plate (2) must be installed in correct position.
Guide in area (A) of grab handle (1) must fit in groove in
area (B) of intermediate plate (2).
RA Removing and installing or replacing front grab handle
BMW AG - TIS
15.02.2013 05:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -