bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

13 RA Removing And Installing_replacing Take-up For Cover On Left Or Right Sill|Page 1907 > < 12 RA Removing And Installing_replacing Cover On Left Or Right Sill|Page 1905
Page 1
background image

51 71 473

Removing and installing/replacing take-up for
cover on left or right sill

Special tools required:

00 9 317

Necessary preliminary tasks:

Remove cover on sill

Drill out blind rivet (1).

Loosen screws (2).

Installation:

Tightening torque 51 71 16AZ

.

Feed take-up (4) in direction of arrow out of trim (3).

Replacement:

If necessary, release screws (1) on running board (2).

Feed out running board (2) in direction of arrow.

Installation:

Guides (3) on take-up (4) must not be damaged.

RA  Removing and installing/replacing take-up for cover on left or right sill

BMW AG - TIS

15.02.2013  10:02

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

13 RA Removing And Installing_replacing Take-up For Cover On Left Or Right Sill|Page 1907 > < 12 RA Removing And Installing_replacing Cover On Left Or Right Sill|Page 1905