bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing_replacing Slider Set For Floating Roofliner|Page 2125 > < 5 RA Removing And Installing_replacing Mechanism For Floating Roofliner|Page 2123
Page 1
background image

54 10 070

Removing and installing/replacing slider set
for floating roofliner

Necessary preliminary tasks:

Remove glass slide/tilt sunroof

Remove rear floating roofliner

Remove fan grille

Remove drive unit with gearing

Unclip end stops (1) on left and right from guide channel.

Installation:

Engage end stops at front and clip into place by applying
pressure.

Carefully unclip slide block (1) on left and right (risk of damage).

Pull driver for rear floating roofliner (2) and slider set (3) towards
rear out of guide.

Disengage rocker arm (1) from driver for rear floating
roofliner (2).

RA  Removing and installing/replacing slider set for floating roofliner

BMW AG - TIS

15.02.2013  12:45

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing_replacing Slider Set For Floating Roofliner|Page 2125 > < 5 RA Removing And Installing_replacing Mechanism For Floating Roofliner|Page 2123