bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Wiring Harness For Rear Lid On Right > < 1 RA Replacing Battery Positive Lead (from Battery To Engine Compartment Partition Co|Page 2175
Page 1
background image

61 12 013

Replacing negative battery cable

Warning!

Observe safety instructions for handling vehicle battery.

Necessary preliminary tasks:

Remove roller cover from luggage compartment.

Release cover on seat belt at top rear 

Remove both rest side sections on rear seat backrest

Remove backrest for rear seat

Remove rear luggage compartment floor trim

Remove front trim for luggage compartment floor

Remove trim for rear right roof pillar (C-pillar)

Remove flap in luggage compartment panel

Remove both trims for rear roof pillar (D-pillar) 

Remove trim on tail panel at top

Remove inner window cavity cover strip on right

Remove storage compartment in luggage compartment on

right

Remove right luggage compartment wheel arch trim.

Remove lashing rail in luggage compartment floor on right

Remove right luggage compartment recess panel

Release nut (1) on battery negative terminal.

Tightening torque 61 21 1AZ

.

Detach battery negative cable (2) upwards.

Release nut (3) and battery negative cable (2).

Tightening torque 61 21 2AZ

.

RA  Replacing negative battery cable

BMW AG - TIS

15.02.2013  13:10

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Wiring Harness For Rear Lid On Right > < 1 RA Replacing Battery Positive Lead (from Battery To Engine Compartment Partition Co|Page 2175