bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Removing And Installing_replacing Left Or Right Rear Light (on Rear Lid) (from 0|Page 2417 > < 8 RA Removing And Installing_replacing Left Or Right Rear Light (on Side Panel) (up T
Page 1
background image

63 21 183

Removing and installing/replacing left or right
rear light (on rear lid) (from 09/2006)

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Necessary preliminary tasks:

Remove panel for rear lid

Release nut (1), gripping the threaded pin (2) with a suitable tool
in so doing. Tightening torque  63 21 1AZ

.

Feed out rear light (3) in direction of arrow and remove in
outward direction from rear lid (4).

Disconnect plug connection (5).

Remove socket housing.

 

Installation:

Make sure sealing washer is fitted on threaded pin (2) between
rear light (3) and rear lid (4)

Make sure sealing frame for rear light is correctly seated on rear
light (3)

RA  Removing and installing/replacing left or right rear light (on rear lid) (from 0

BMW AG - TIS

15.02.2013  14:54

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Removing And Installing_replacing Left Or Right Rear Light (on Rear Lid) (from 0|Page 2417 > < 8 RA Removing And Installing_replacing Left Or Right Rear Light (on Side Panel) (up T