bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Replacing Halogen Bulb For High-beam Headlight On Right > < 2 RA Instructions For Replacing Light Bulbs (interior Lights)
Page 1
background image

63 99 002

Replacing halogen bulb for high-beam
headlight on left

Warning!

Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).

Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.

Follow instructions for handling light bulbs (exterior lights).

Necessary preliminary tasks:

M54:

Partially remove intake filter housing

Note:

Headlight (3) removed for purposes of clarity.

 

Unlock clip (1) in direction of arrow.

Remove cover (2) from headlight (3).

Unclip bulb (1) by pressing on plug (2).

Remove bulb (1) from headlight (3), disconnect plug connection
and remove bulb (1).

 

Installation:

Insert bulb (1) in headlight (3) at bottom at first and then tilt
upwards until bulb (1) snaps audibly into place.

Make sure bulb (1) is correctly seated in catches (4).

Note type of bulb.

RA  Replacing halogen bulb for high-beam headlight on left

BMW AG - TIS

15.02.2013  15:07

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Replacing Halogen Bulb For High-beam Headlight On Right > < 2 RA Instructions For Replacing Light Bulbs (interior Lights)