bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Dryer Bottle For Air Conditioner|Page 2563 > < 4 RA Replacing Valve Insert For Refrigerant Line|Page 2561
Page 1
background image

64 53 510

Removing and installing/replacing dryer
bottle for air conditioner

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Avoid contact with refrigerant and refrigerant oil.

Follow safety instructions for handling refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Follow instructions for opening and replacing parts in
refrigerant circuit!

If A/C system is opened for more than 24 hours:

Replacing drier insert for A/C system

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Release fluid reservoir for windscreen washer system and

place to one side 

Release screws (1) and remove refrigerant lines (2).

Installation:

Replace all sealing rings and moisten with refrigerant oil.

Tightening torque 64 53 1AZ

.

RA  Removing and installing/replacing dryer bottle for air conditioner

BMW AG - TIS

15.02.2013  15:58

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing_replacing Dryer Bottle For Air Conditioner|Page 2563 > < 4 RA Replacing Valve Insert For Refrigerant Line|Page 2561