X Series E83 X3 3.0d (M57TU) OFFRD
65 75 055
Removing and installing/replacing emergency
power siren with tilt sensor
Necessary preliminary tasks:
•
Remove heater bulkhead.
Unfasten plug connection (1) and disconnect.
Release screw (2) and remove emergency power siren (3) with
emergency power siren holder in direction of arrow.
Installation:
Make sure emergency power siren holder is in correct installation
position.
Release nut (1) and remove emergency power siren (2) from
holder (3).
RA Removing and installing/replacing emergency power siren with tilt sensor
BMW AG - TIS
15.02.2013 16:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
