X Series E83 X3 3.0d (M57TU) OFFRD
67 31 531
Removing and installing/replacing drive for
backrest angle adjustment (front seat
removed)
Disconnect plug connection (1).
Note:
Secure drive for backrest angle adjustment (5) against falling out.
Release screws (3).
Remove drive for backrest angle adjustment (5) with fixture for
plug connection (2) in direction of arrow from flange (4).
If necessary, remove inner drive shaft from drive for backrest
angle adjustment (5).
Installation:
Make sure drive shaft (1) is exactly seated.
Ensure fixture for plug connection (3) and drive for backrest
angle adjustment (4) on flange (2) are correctly seated.
RA Removing and installing/replacing drive for backrest angle adjustment (front sea
BMW AG - TIS
15.02.2013 16:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
