X Series E83 X3 3.0d (M57TU) OFFRD
67 62 020
Removing and installing/replacing flat motor
for rear left or right power window unit
Necessary preliminary tasks:
•
Detach sound insulation on rear door in working area
Note:
For clearer illustration, shown with sound insulation removed.
Unfasten plug connection (1) and disconnect.
Release screws (2).
Detach flat motor for power window unit (3) in direction of arrow
from power window unit (4) and remove.
Installation:
Fit flat motor for power window unit (3) exactly on teeth of power
window unit.
Replacement:
A normalization must be carried out in order to activate anti-
trapping protection.
Operating sequence for normalization:
•
Open corresponding window completely.
•
Operate corresponding power window switch in "Close"
position (second switch stage).
•
Once the upper end position has been reached, hold power
window switch down for approx. 1 second more.
Normalization is thus completed.
Note:
Carry out function check (one-touch function, anti-trapping
protection and, if necessary, comfort function).
RA Removing and installing/replacing flat motor for rear left or right power window
BMW AG - TIS
15.02.2013 16:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -