X Series E83 X3 3.0i (M54) OFFRD
Push in toothed shaft (5) until the longitudinal holes in the
toothed sleeve (6) are positioned centrally with respect to the
thread.
Place chain wheels in special tool 11 6 180 , position tooth gap
on inlet chain wheel as shown in illustration and feed on chain.
Important!
Do not alter position of chain wheels with respect to chain
when removing from special tool 11 6 180 .
Remove chain with sprocket wheels positioned from special tool
11 6 180 and so that tooth spaces oppose each other on inlet
side.
Align chain with sprocket wheels so that tooth spaces are
positioned exactly over each other on inlet side.
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
16.02.2013 13:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -
