X Series E83 X3 3.0i (M54) OFFRD
12 42 550
Removing and installing/replacing battery
positive lead between starter motor and jump
start terminal (M54)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Disconnect battery negative lead
Follow instructions for disconnecting and connecting battery
Unclip cover (1).
Open protective cap.
Unscrew nut (1).
Tightening torque 12 51 4AZ
.
RA Removing and installing/replacing battery positive lead between starter motor an
BMW AG - TIS
16.02.2013 14:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -